2011 Sabre
46' (14.02m) 456 - LUNA BLUE II
The Sabre 456 is a wonderful example of Maine boatbuilding, a craft passed through generations of proud craftsmen and women.
- Marco Island Florida United States
- 456
- Sail
- Used
- Diesel
- Fiberglass Hull
Description
The Sabre 456 is a wonderful example of Maine boatbuilding, a craft passed through generations of proud craftsmen and women.
While her hull and deck are built using the modern VIP resin infusion technology, her interior is crafted in the traditional manner with bulkheads and furnishings tabbed to the inner skins of the hull and deck to create a monolithic structure. This method of boatbuilding provides the strongest possible vessel, one that her owners can rely upon to take them across oceans in complete safety.
In her handcrafted American cherry interior are many fine woodworking details: an interior plan with a sumptuous master suite for a cruising couple, and a main salon and galley providing all modern creature comforts for extended periods aboard. Guests will be comfortably accommodated in an aft cabin with a private ensuite head unit.
The Sabre Design Team gave the Sabre 456 both great sailing performance and elegant comfort, the very best of the past brilliantly combined with the latest in boatbuilding technology.
Curtis Stokes & Associates is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Denison Yachting. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel
Data Sheet
LOA: 46' " (14.02 Meters)
Type: Sail - Used
Year: 2011
Beam: 14' 1"
Bridge Clearance: ' "
Draft Max: 5' 6"
Draft Min: ' "
Cabins: 2
Single Berths: 7
Heads: 2
Maximum Speed: Knots
Cruise Speed: Knots
Range NMI:
Fuel Type: Diesel
Hull Material: Fiberglass
Fuel Tank: 100 Gallons (378.54 Liters)
Fresh Water: 200 Gallons (757.08 Liters)
Holding Tank: 45 Gallons (170.34 Liters)
Full Details
View Full DetailsSail Area
I : 59.50 ft
J : 17.58 ft
P : 52.50 ft
E : 19.17 ft
Working Sail Area : 1043.00 sq ft
Most Recent Upgrades
2023 - APRIL
- Bottom maintenance – Two (2) coats of Pettit Odyssey 60
- Two (2) coats of Trilux on sail drive and bow thruster
- Flexofold propeller coated with two coats of Prop Speed, new O ring and prop nut.
- All zincs replaced
- Hull compound, wax and Nano-seal
- New SD60 lower unit plus new seals
- New Zest Microwave
- New speedo transducer
- 2022
- New canvas - bimini, rain connector, dodger, mainsail cover, winch covers and hatch covers
- Teak toe and bang rails stripped and finished with eight (8) coats of Sikkens Cetol
- Two (2) new propane tanks
- 2021
- New Xantrex Freedom 3000 invertor charger
- New Galvanic Isolator
- New mast boot
- 2020
- New Full Batten Mainsail NPC Radian NorDac NDR 9.0
- New 135% Genoa Radian NorDac
- New running rigging
- New Mixing Elbow
- New Alternator
- New water pump
- New serpentine belt system
- New starter
- New generator water pump
2019
- New removable Stay Sail with Harken top down furler
- New Watt and Sea Hydro Generator
- New outboard engine - Tahatsu 9.8 hp
- New Electronics Raymarine package –
- - Raymarine es127 (Two, Helm and NAV station)
- - e7D in Master Cabin
- - Five (5) i70s new Autopilot EV-400 Sail Pilot with P70 Autopilot controller
- - New Raymarine AIS Class B Transceiver
- - New SR150 Sirius receiver, weather and Radio
- - New Radar Raymarine RD424HD 4KW 24”
- - New Raymarine DST800 Depth/Speed/Temperature
- - New Raymarine Wind Transducer with ITC-5 Converter
- - New Digital Yacht DTV100 Marine HD TV/FM Antenna
Manufacturer Provided Description
The Sabre 456 was designed by the Sabre Design Team in collaboration with Jim Taylor Yacht Design. This award winning partnership is responsible for all of Sabre's sailing yacht designs since 1991. She is built in the Maine where boatbuilding is an art passed through generations of proud craftsmen and women.
While her hull and deck are built using the modern resin infusion technology, her interior is crafted in the traditional manner where bulkheads and furnishings are tabbed to the inner skins of the hull and deck to create a monolithic structure. This provides the strongest possible yacht, one that her owners can rely upon to take them across oceans in complete safety.
In her hand crafted American cherry interior you will discover fine wood working details such as dovetailed maple drawer boxes and elegant inlays. The pinnacle of the boat builders art. Her interior plan offers a sumptuous master suite for the cruising couple and her main salon and galley provide all of today's creature comforts for extended periods aboard. You can rely on the Sabre Design Team to give her all of the great sailing performance for which Sabre is so well known. The Sabre 456 offers the best of the past brilliantly combined with the latest in boatbuilding technology.
Custom Features
- Kato dinghy davits
- Radar tower
- Two (2) extra Lifeline AGM batteries @210ah (Total = 5 batteries @1050ah)
- Bow mounted wichard fold-down pad eyes for dinghy storage
- Emergency rudder and emergency tiller
- Wi-fi Extender w/ antenna
- Isinglass all-weather cockpit enclosure
- Edson emergency manual bilge pump
- Custom close cell cockpit cushions
- Custom storage shelf over hot water tank
- Extensive spare(s) inventory
- Rocna anchor 25kg with 150ft of 3/8in G4 chain and 150ft with 3/4in 8 plait rode
- Dinghy - AB 9.6AL
- Lifesling overboard rescue system
- Watt & Sea Hydrogenerator
- Extra storage cabinets
- Solar panels @320 watts
- Extra Led cabin lights
- Teak shower grates
- V-berth electric lift
- Fusion stereo
- Samsung television on electric lift
- Cruising spinnaker (Never Used)
- Custom V-berth and aft cabin linens
Hull
- A Resin infused Airex closed cell PVC foam cored, fiberglass of alternate layers of mat knitted biaxial rovin
- Isophthalic NPG gelcoat
- Below waterline chopped strand glass and vinyl ester resin as a back-up for ISO NPG gelcoat
- Internal deck to hull joint
- LP painted Boot stripe
- Bulkheads, berth faces, shelves and floor stringers laminated to hull providing integral, structural strength
- Step transom
Accommodations
- Polished SS double galley sink
- AC/DC Indel Isotherm drawer type refrigerator with two drawers in galley
- Top loading DC freezer in generator room
- Three (3) Dometic brand air conditioners
- Quiet Flush MSDs freshwater feed
- Teak hatch boards, screen saloon doors
- 6’6′′ headroom in main and aft areas, with 6’4′′ headroom in forward sections
- Forward cabin has a 6’8′′ Island V-berth
- Main cabin has two settee berths; port berth converts to a double. Berths are 6’8′′ long
- Aft cabin with 6’8′′ full width double berth
- Storage in aft-cabin settee
- Lockers and shelves in aft cabin for storage
- Large cedar lined hanging lockers in fore and aft cabins
- Navigation station - optimized area for instrument installation, storage locker space and panel arrangement at chart
- table
- Main cabin berth back lockers with louvered doors
- Two (2) heads with showers
- Forward head has stall shower and ceramic tile sole
- Thick foam cushions covered with a durable fabric, zippered for ease of removal and cleaning
- Lights in cedar lined hanging lockers
- Convenience tool kit
- Cockpit locker and engine compartment lights
- Flush thru-hulls with Marelon sea valves
- Force 10 3 burner propane stove with oven
- Varnished cherry interior finish
- Automatic electric bilge pump with high water alarm
- Manual, cockpit mounted bilge pump
- Laminated trim on shelving and berth tops
- Cherry hull ceilings
- Galleyware – Pots, pans, tableware, etc.
- Rail mounted BBQ- Grill
- HULL
- A Resin infused Airex closed cell PVC foam cored, fiberglass of alternate layers of mat knitted biaxial rovin
- Isophthalic NPG gelcoat
- Below waterline chopped strand glass and vinyl ester resin as a back-up for ISO NPG gelcoat
- Internal deck to hull joint
- LP painted Boot stripe
- Bulkheads, berth faces, shelves and floor stringers laminated to hull providing integral, structural strength
- Step transom
- ENGINE
- Yanmar 75hp 4JH-TCE 4 cylinder. fresh water cooled, turbocharged diesel with sail drive and folding propeller (1,655 engine hours)
- 12-volt 120-amp Balmar alternator for ship’s batteries
- 100-gallon custom aluminum fuel tank, deck filled, shut-off valve, vented and grounded
- Racor fuel filter/water separator (Dual)
- Raw water intake strainer with wrench
- Flexible four-point engine mounts minimize vibration and noise
- Engine compartment exhaust blower
- Engine compartment light
- Engine access provided by sound and heat insulated removable panels
- Tachometer, hour meter, volt, oil, fuel level, and temperature gauges recessed in cockpit face
- Generator – Cummins Onan 7.5 kva (350 gen hours)
- Bow thruster xTurn, separate 24v battery system
Engine
- Yanmar 75hp 4JH-TCE 4 cylinder. fresh water cooled, turbocharged diesel with sail drive and folding propeller (1,655 engine hours)
- 12-volt 120-amp Balmar alternator for ship’s batteries
- 100-gallon custom aluminum fuel tank, deck filled, shut-off valve, vented and grounded
- Racor fuel filter/water separator (Dual)
- Raw water intake strainer with wrench
- Flexible four-point engine mounts minimize vibration and noise
- Engine compartment exhaust blower
- Engine compartment light
- Engine access provided by sound and heat insulated removable panels
- Tachometer, hour meter, volt, oil, fuel level, and temperature gauges recessed in cockpit face
- Generator – Cummins Onan 7.5 kva (350 gen hours)
- Bow thruster xTurn, separate 24v battery system
Auxiliary Engine information and equipment
- Yanmar 75hp 4JH-TCE 4 cylinder. fresh water cooled, turbocharged diesel with sail drive and folding propeller
- 12-volt 120 amp Balmar alternator for ship?s batteries.
- 100 (approx) gallon custom aluminum fuel tank, deck filled, shut-off valve, vented and grounded.
- Racor fuel filter/water separator.
- Raw water intake strainer with wrench.
- Engine oil drip pan.
- Flexible four point engine mounts minimize vibration and noise.
- Engine compartment exhaust blower.
- Engine compartment light.
- Engine access provided by sound and heat insulated removable panels.
- Tachometer , hour meter, volt, oil, fuel level, and temperature gauges recessed in cockpit face.
- Cruising speed +- 8 knots at 3000 RPMS's
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
ENGINES
Engine 1
- Engine Make: Yanmar
- Engine Model: 4JH-TCE
- Engine Year:
- Engine Type: Inboard
- Drive Type:
- Power HP: 75.00
- Fuel Type: Diesel
- Hours:
Photos
Click any image to view enlarged version. Swipe enlarged image to see additional enlarged images.
Multimedia
Contact Broker
For more information about this yacht please contact Curtis Stokes and Associates, Inc.
We look forward to working with you!
Want more information about this yacht?
Curtis Stokes & Associates
Fort Lauderdale, FL
Phone: 1-954-684-0218
Toll Free: 1-855-266-5676
Fax: 1-954-807-1445
Email: info@curtisstokes.net
Website: https://www.curtisstokes.net
Curtis Stokes and Associates, Inc. is a yacht brokerage firm consisting of nine offices and fifty brokers throughout the United States offering worldwide marketing, buyer brokerage services and yacht charters. We also specialize in marketing and selling Great Loop capable yachts and boats.