1988 Brewer
41' (12.60m) STEEL HULL Kaiulani - KaSondera
38’ Custom Sailing Cutter. This is a must see vessel. This is the nicest, most well maintained vessel I have ever seen. This vessel is every inch a superb, well found blue water cruiser! Let’s go see her.
- Boston Massachusetts United States
- STEEL HULL Kaiulani
- Sail
- Used
- Diesel
- Steel Hull
Description
When you step aboard the STEEL hulled KaSondera you will appreciate the love and craftsmanship that went into her design and construction. This 1988 Kaiulani 38, a Ted Brewer design, built by Kaiulani Sailing Vessels of South Portland ME. She is a one-of-a-kind live-aboard cutter cruiser.
Brewer was known for his experience designing cruisers and steel hulls in particular. His signature rounded chine hull, appealing sheer, and full keel with characteristic “cutaway forefoot and bite aft”, are evident in KaSondera’s design. With 748 sq ft of sail, she has a Main, Genoa, Intermediate Yankee, Staysail, Storm Trysail, Storm Jib, Cruising Spinnaker, twin head stays, and is powered by a 50 hp Perkins 4-108 with 3,500 hours, and has a 1500 mile range under power. She is equipped with a VHS, GPS, compass, single side band radio, chart plotter, depth sounder, auto helm, and Aries steering vane. Below decks, the varnished teak & holly interior and soft lighting is stunning, with custom cabinetry and thoughtful details throughout. Heck, she even has a crystal cabinet!
Sleeping accommodations include 2 cabins, 3 single berths & 1 double. There is a custom teak dinette (seats 6), settees port & starboard in the Main Salon, and a sizable nav station with storage. The Galley has 2 stainless steel sinks, a gimbal 4 burner propane stove with oven & broiler, and a Sea Frost refrigerator & freezer, and a large standing shower with a seat and custom bi-fold textured plexiglass doors make the head truly stand out. She has 3 solar panels, a cockpit dodger & bimini, and a deck large enough to carry two kayaks. She had a $120K refit in 2017 with plenty of upgrades including a new transmission, fuel pump, fuel lift pump, soft fuel lines, and secondary fuel/water separator system in 2022. KaSondera is as close to Bristol as we have seen in a long time!
Cruising cutters are known for their seaworthiness, rugged offshore capability, elegance, and superb sail-ability. KaSondera is well loved and meticulously maintained by the current owner who made a single-handed transatlantic crossing from Haverhill, MA to Horta Faial, Azores, in 1992. If you are a fan of Brewer designs and looking for a truly unique turnkey live-aboard…look no further.
Call or email TODAY to schedule a showing.
Check out KaSondera’s website for the complete list of extras that are being offered with the sale.
www.bluewatersailboatforsale.com
Curtis Stokes & Associates is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Brewer Yacht Sales. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel
Data Sheet
LOA: 41' 4" (12.60 Meters)
Type: Sail - Used
Year: 1988
Beam: 11' 10"
Bridge Clearance: 52' 5"
Draft Max: 5' 4"
Draft Min: ' "
Cabins: 2
Sleeps: 6
Heads: 1
Maximum Speed: Knots
Cruise Speed: Knots
Range NMI:
Fuel Type: Diesel
Hull Material: Steel
Fuel Tank: 150 Gallons (567.81 Liters)
Fresh Water: 130 Gallons (492.1 Liters)
Holding Tank: Gallons ( Liters)
Full Details
View Full DetailsVessel Information
STEEL CONSTRUCTION
Information & Features
1986 Perkins 4-108 (Engine 1)
Type: Inboard
Fuel Type: Diesel
Power: 50 hp
Propeller Type: 3 Blade
Hours: 3500
Propeller Material:
Bronze
Dimensions
LOA:
41 ft 4 in
Beam:
11 ft 10 in
Length On Deck:
37 ft 4 in
Max Bridge Clearance:
52 ft 4 in
LWL:
31 ft 4 in
Max Draft:
5 ft 4 in
Weights
Dry Weight:
34,000 lb
Ballast:
7,500 lb
Displacement:
23,000 lb
Speed
Cruising Speed:
6.5 kn
Max Speed:
8.5 kn
Tanks
Fuel:
2 x 150 gal Other
Fresh Water:
1 x 130 gal Stainless Steel
Holding:
1 x 50 gal Plastic
Accommodations
Single Berths: 3
Double Berths: 1
Cabins: 2
Heads: 1
Other
Hull Shape: Monohull
Builder: Kaiulani Sailing Vessels
Covers
- Bimini Top
- Cockpit Cover
- Lazyjacks
Electrical Equipment
- Shore Power Inlet
Electronics
- Depthsounder
- Radar
- Wind Speed and Direction
- Navigation Center
- Plotter
- Radio: Alpine Cassette
- Compass
- GPS: 2
- Cockpit Speakers
- VHF
Inside Equipment
- Electric Bilge Pump
- Oven: with broiler
- Manual Bilge Pump
- Multiple Heating Devices and sources
- Hot Water
- Refrigerator: freezer
- Battery Charger
1200 W Hart Invertor
Outside Equipment/Extras
- Teak Cockpit
- Outboard Engine Brackets
- Wind Generator
- Solar Panel: 3 panels
- Cockpit Cushions
- Cockpit Table
- Swimming Ladder
Rigging
- Steering Wheel
- Tiller: Steel
Sail Inventory
Main
Intermediate Yankee
Large Light Yankee
Cruising Spinnaker
Staysail
Storm Jib
Storm Trysail
- Spinnaker
- Genoa
- Trisail
Hull
Steel was chosen simply because no other hull material has its strength and durability. Steel vessels are known to have survived severe groundings and subsequent lengthy poundings as well as collisions with whales and flotsam. Steel also has the benefit of being repairable to its original strength in practically any port in the world.
1. Hull, deck, cabin, rudder are fabricated entirely of steel
A. Frames- 1 ¾” X 1 ¾” X 3/16” tee bar on 4’ centers with 3 frames on 2’ centers.
B. Keel bottom – ½”
C. Keel sides and dividers – 3/16”
D. Topsides – 11 gauge (approx. 1/8”)
E. Deck and cabin – 12 gauge (1/10”)
F. Deck beams - 1 ½” X 1 ½” X 3/16” on 2’ centers
G. Stem – 4” X 3/8”
H. Longitudinals – 1” X 3/16”
I. Cockpit – 12 ga. And 14 ga.
2. Exterior of hull is sandblasted, and sealed with Hi-Build epoxy.
3. Hull is faired and top coated with AlexSeal. Decks and cabin tops are coated with Nonskid AlexSeal. Cockpit is AlexSeal. Decks primed and laid with Teak decking system adhesive and toped in teak. Fastened with stainless steel screws into angle iron welded to deck.
4. Interior of hull is partially hot zinced ( keel, sump, and cockpit lockers, fore peak) , cold zinced on balance of interior, and sealed with HiBuild Epoxy.
5. Hawse ports – Stainless steel.
6. Lead Ballast (approximately 5300#) Covered with epoxy resin.
7. Deep sump – bottom coated with epoxy resin.
8. Cockpit locker covers – steel topped with teak
9. Bottom Paint – Interlux –Inter Protect 2000E – Interlux ACT Brown
10. Bulwarks 5” X1” Teak
11. Cover for companionway sliding hatch
12. Stainless collar welded to deck for Halyard turning blocks
13. Fuel is carried in two separate baffled tanks totaling approximately 150 gallons
14. Rudder is attached to keel. There is a protected aperture for the propeller
15. Cockpit drains – Two 2 inch Exiting thru schedule 80 steel pipe to Reinforced Hose
16. Zinc anodes – 6 on hull 2 on rudder
Wood & Interior
The entire inside of the hull is sandblasted clean, sprayed with zinc rich primer and coated with epoxy. Then insulation is installed above the water line to reduce condensation and noise.
The varnished teak interior custom designed by the owner was installed and finished by skilled cabinetmakers. Ash overhead slats are used for lightness and a teak and holly sole result in an interior that will appeal to the most discriminating sailor
1. Predominantly teak interior with ash – varnished with 4 coats minimum.
2. Teak Bulwarks.
3. Cockpit Teak grating.
4. Teak slats on cockpit seats.
5. Teak and holly cabin sole.
6. Teak cockpit coamings.
7. Exterior teak handrails on cabin top.
8. Interior teak handrails of sufficient number to allow safe movement throughout the cabin.
9. Mirror in head.
10. Custom Brass fixtures in the head
11. Stainless sink in head
12. Hanging lockers (Cedar) 3 the locker in the V Bert is very large and deep
13. Double stainless sink in galley
14. Refrigerator – Freezer (approx. 8 cubic feet) with 4” foam insulation of all faces –Both Mechanical Refrigeration as well as 110 shore power. 2 Ice cube trays on hanger
15. Cushions 5” luxury foam
16. Aft cabin and V berth both have custom box spring mattresses (fire proof- water resistant)
17. 6.4” approximate headroom.
18. Navigation table – large with storage under and fold down seat.
36. Dinette table made of solid teak and highly varnish –custom designed for KaSondera and will open to accommodate 6 comfortably.
37. Large dish and dry goods storage in galley including pot locker and custom designed ceiling to floor can good storage with matching doors and custom brass hardware.
38. Trash storage under sink.
39. Storage in general is excellent since all tank-age is underneath the cockpit sole. There is dry storage in the main salon under seats as well as above.
40. Insulation- closed cellular foam throughout interior above the waterline.
41. Doors to head, aft cabin, food storage in galley and forward v berth are custom arched, solid panels on lower and louvered on upper.
42. Large standing fiberglass shower stall with seat, and rack for hanging foul weather gear. Boast custom bi-fold textured Plexiglas doors.
The head compartment features a molded fiberglass shower with seat and bi-fold doors and the water closet is placed fore and aft making It usable on both tacks.
Mechanical
Deck Hardware & Rigging
Mast – by Hall Spars, 52’.5” above waterline with twin spreaders. Mast, main boom, and staysail boom are all top coated with AlexSeal
A. 9/32” twin forestays
B. 5/16” backstay
C. 7/32” staysail stay
D. 9/32” uppers
E. ¼” additional running backstays to be rigged in rough weather
F. ¼” balance of rigging
* Lazy Jacks
G. Trysail Track
H. Deck Lights on spreaders
I. Tri-color light
J. Strobe Light – mast head
K. Anchor Light
L. Steaming Light
M. Double Downwind Poles and tracks
N. Main boom has internal outhaul while staysail boom as external outhaul
O. Hydraulic Back Stay Adjuster
P. Mast Steps
Q. Harkin Boom Vang
93. Sails – 8.33 oz. Maine 3 sets of reef points with outhauls all leading to cockpit Genoa
6.7 oz. Yankee- custom sail bag for mounting on life lines
8.33.oz Staysail and sailcover Storm Trisail
Spinnaker
Sheets for all above sails
94. Halyards – pre-stretched rope. Internal except staysail halyard. All halyards are led aft to cockpit thru Shaffer sheet stoppers.
95. Bow and stern pulpits – double rail with gate at transom to swim ladder. Steaming lights and GPS, Radio antenna attached
96. Chainplates – heavily constructed and welded.
97. Lifelines -28” heavy duty stanchions with double lines and gates on port and starboard
98. Stainless steel bowsprit with two rollers.
99. Bobstay – 5/8” stainless rod.
100. Four Lewmar opening hatches (one in aft cabin, one in forward cabin and 2 in main cabin) with screens.
101. Twelve cast aluminum ports – all opening with screens an curtains
102. Four Dorades
103. Cockpit Dodger- full Bimini and cockpit enclosure with screens.
104. Mooring cleats – 6 Stainless – 10”
105. CQR (35lbs) with 200’ 5/16 Hi-tensile galvanized chain
106. Danforth (25lbs) with 200’ of 5/8 rope
107. Stainless steel genoa tacks welded to deck Cars for track included
108. Adkins and Hoyle companionway cover system
109. Custom Mainsheet traveler – Schaefer bridge extrusion and track
110. Staysail traveler
111. (2) Stainless Mast Guards
112. AlexSeal Nonskid covers much of the cabin top area.
Other
- Alpine Digital FM-AM Cassette
- Edson Folding Cockpit Table
- Speakers (2) in Main Salon (1) in aft cabin (2) in cockpit and connections for remote speakers at bow
- Dock lines – 4
- Fenders – 4
- Radar Reflector
- Fresh water inlet Pressure regulated water & Check Valve
- Fuel Fill Warning Whistles (2)
- Custom Brass Hardware through out
- Outboard Motor Mount (teak) on stern
- (2) Fender Boards
- 50' 30 amp Power Cord
- Spares for Aries Steering Vane (3) Paddles) + Miscellaneous
- Spares - 6 Fuel Filters
- Flood Light with connection both in cockpit and V Berth
- Lifesling throwable
- Full Cockpit Cushions
- Edson Folding table in Cockpit
- Screens on all opening ports and hatches as well as for companionway.
- 4 locking winch handles 1 non lock winch handle - 1 floating non lock winch handle
- 2 series 7 Snatch Blocks
- Boson’s. chair
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Mechanical Disclaimer
Engine and generator hours are as of the date of the original listing and are a representation of what the listing broker is told by the owner and/or actual reading of the engine hour meters. The broker cannot guarantee the true hours. It is the responsibility of the purchaser and/or his agent to verify engine hours, warranties implied or otherwise and major overhauls as well as all other representations noted on the listing brochure.
Disclaimer
The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.
Listing MLS by Yachtr.com
ENGINES
Engine 1
- Engine Make: PERKINS
- Engine Model: 4108
- Engine Year: 1988
- Engine Type:
- Drive Type: Direct
- Power HP: 50.00
- Fuel Type:
- Hours: 3500.00
Photos
Click any image to view enlarged version. Swipe enlarged image to see additional enlarged images.
Multimedia
Contact Broker
For more information about this yacht please contact Curtis Stokes and Associates, Inc.
We look forward to working with you!
Want more information about this yacht?
Curtis Stokes & Associates
Fort Lauderdale, FL
Phone: 1-954-684-0218
Toll Free: 1-855-266-5676
Fax: 1-954-807-1445
Email: info@curtisstokes.net
Website: https://www.curtisstokes.net
Curtis Stokes and Associates, Inc. is a yacht brokerage firm consisting of nine offices and fifty brokers throughout the United States offering worldwide marketing, buyer brokerage services and yacht charters. We also specialize in marketing and selling Great Loop capable yachts and boats.