Picture of


1998 | 36' Sabre Sailboat for Sale

1998 Sabre

36' (11.02m) -

This Sabre 362 has been beautifully preserved for over the years, and with features such as air conditioning, new dodger and sail cover, she stands apart from the rest. She looks, smells, and feels like new inside.


Vessel ID# 2789716      Last Updated: 2022-06-13 20:10:03

$ 129,000 USD

€ 122,630 Euros
€ 167,571 CAD

Description

Hull #201 was built with many fantastic options in Maine, and delivered to it's first and only owner here in

California. "Athena" was used gingerly, accumulating only about 112 hours in her life. Beautiful details inside and out. The cost new of #201 was $248,000, or what would be over $400,000 corrected for inflation today and it shows.This Sabre 362 has been beautifully preserved for over the years, and with features such as air conditioning, new dodger and sail cover, she stands apart from the rest. She looks, smells, and feels like new inside.

This is the one of two Sabres currently for sale in the US, and the only one on the West Coast. They do not come up often, so don't let this one get away.

Call to set your appointment now.

Please see full specs tab for full specification list.


Curtis Stokes & Associates is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Denison Yachting. It is offered as a convenience by this broker/dealer to its clients and is not intended to convey direct representation of a particular vessel

Data Sheet

LOA: 36' 2" (11.02 Meters)

Type: Sail - Used

Year: 1998

Beam: 12' "

Bridge Clearance: ' "

Draft Max: 4' 8"

Draft Min: ' "

Cabins: 2

Heads: 1

Maximum Speed: Knots

Cruise Speed: Knots

Range NMI:

Fuel Type: Diesel

Hull Material: Fiberglass

Fuel Tank: 34 Gallons (128.7 Liters)

Fresh Water: 78 Gallons (295.26 Liters)

Holding Tank: 30 Gallons (113.56 Liters)

Full Details

View Full Details

Information & Features

Covers

- Spray Hood

- Mainsail Cover


Electrical Equipment

- Shore Power Inlet - Inverter


Electronics

- Log-Speedometer

- Wind Speed and Direction - Navigation Center

- Autopilot

- Radio

- Compass

- CD Player

- Cockpit Speakers

- VHF


Inside Equipment

- Oven

- Marine Head

- Air Conditioning

- Heating

- Hot Water

- Refrigerator

- Deep Freezer


Outside Equipment/Extras

- Cockpit Shower

- Cockpit Cushions

- Swimming Ladder


Rigging

- Steering Wheel

- Electric Winch


Sails

- Fully Battened Mainsail

- Genoa

- Cockpit Speakers

- VHF

Layout

V berth forward with large berth, cedar lined hanging locker, stainless steel sink and storage shelves outboard. Main salon has L shaped settee to starboard with bulkhead mounted table for dining. Straight settee to port with nav station at aft end. There are cabinets outboard, lined storage areas behind settees and the starboard settee

can convert to a double berth for sleeping.

The galley is to starboard at the base of the companionway followed by the private aft cabin with double berth, cedar lined hanging closet and bench seat. The head is across to port with a separate shower stall and wet gear locker

Hull/ Deck

White deck & Hull w/blue, red & white waterline stripes, step transom & wing keel.

Elliptical rudder w/carbon fiber rudder post

3 Blade Feathering MaxProp

2 Ocean 60 Lewmar hatches w/Lewmar screens

2 Ocean 10 Lewmar hatches w/Lewmar screens

Solid teak main hatch boards

Alternate screen main hatch boards

2 chrome dorade vents w/screens

9 opening ports with shades and screens

4 fixed windows w/shades

Swim ladder with teak steps on step transom

Cockpit shower with hot and cold water

40" Edson leather covered wheel

Detachable cockpit table

Electronics

Autohelm Seatalk Instruments. Wind, Speed & Depth

Autopilot - Raymarine

Radar - Raytheon RN300

Ritchie Compass on pedestal

Nav Station - Raymarine C80 Chartplotter

ICOM VHF IC-M504

Alpine HD radio with 2 cabin speakers

Autohelm Seatlk Multi nav station repeater

3" Brass clock and barometer

Galley

2 burner gimbaled propane stove w/oven/broiler

2 compartment refrigerator and freezer

Double Stainless steel sink

Corian Countertops - Blue

Ample locker and drawer storage

Propane tanks and electronic safety sensing system

Rigging

2 Lewmar #48ST primary jib sheet winches

1 Lewmar #30ST Mainsheet winch

1 Lewmar #30ST Halyard winch on cabin top

5 Lewmar rope clutches for main, halyards, and reef lines

3 aluminum cam cleats for traveler and vang

Hall Spar mast and boom w/ridged Hall spar boom vang

Harken mainsheet traveler with 4:1 purchase control lines

Split backstay with rig tensioning system

Wheel Cover

Dodger

Sail Area

IJPE : 634.50 sq ft I : 48.50 ft

J : 13.42 ft

P : 41.58 ft

E : 14.83 ft

Working Sail Area : 634.00 sq ft

Manufacturer Provided Description

The Sabre 362 was designed by Jim Taylor to be a capable club racer and a spirited but comfortable coastal and offshore cruiser. Not surprisingly, the 362 succeeds admirably on both levels. In many respects, creating a genuine racer-cruiser, or in today's vernacular, a "performance cruiser," is more challenging than producing a boat dedicated to a specific task.


We may not like to admit it, but a combination of casual racing and short-term cruising is the way most of us actually use our boats. We want to win the Wednesday night beer bashes and be competitive in an occasional offshore race, and we want to enjoy a couple of weeks, or even a month spent cruising every summer. We also want a boat that can stand up to the rigors of a passage, just in case this is the year we finally get away to Bermuda or the islands. Although the 362 has been in production for nearly 10 years, with more than 120 boats launched, the design premise remains fresh, and Sabre's execution continues to be superb. The 362 was built from 1993- 2003, Hulls #107 - #268. This one was built in 1998 and is hull #201.


The details:

The 362 is nicely proportioned and maintains a rather stately bearing in the water, an intangible that Taylor and Sabre's design team, headed by Ken Rusinek, seem to have patented. The ends are moderately short, and the sheer is flat, but the bow entry has a soft rake that brilliantly takes any racy edge off the boat. The cabintrunk is carried well forward for interior volume, but it blends naturally into the linear flow of the hull line. The recessed portlights lend an air of sophistication. Beam is carried well aft, providing enough space for a comfortable aft quarter cabin below, before tapering into a handsome stern. Interestingly, the transom swim step, de rigueur on most new boats, is offered as an option on the 362. Sabre recognizes that despite the 362's quick hull shape, she also has a certain appeal to traditionalists. Below the water, the 362 is designed to offer excellent all-around performance, even when loaded with provisions for an extended cruise. One of the problems with pure performance boats masquerading as cruisers is that they have very limited load carrying capacity, at least not without radically altering their sailing characteristics. The 362 has offers a high ballast/displacement ratio of at least 40 percent and a respectable displacement/length ratio of 217. Sabre's enduring popularity and the healthy resale value of its older boats is closely linked to the high quality of the original construction. The company claims to build boats "The Maine Way," and whatever that is, it has proven to be a fine way to build boats for three decades. The 362 hull features a balsa core sandwiched between layers of hand-laminated fiberglass of alternate layers of mat knitted biaxial roving. Sabre employs the SCRIMP method of resin infusion. Vinylester resin is used below the waterline as a backup for ISO NPG gelcoat to prevent osmotic blisters. The hull-to-deck joint is through-bolted and chemically bonded on an internal flange. The 362 is constructed in the same fashion as the company's larger boats, without the extensive use of molded pans and liners. Instead, bulkheads, berth faces, shelves, floors and all stringers are laminated to the hull providing integral structural support. The mast is keel-stepped on a bridge. Chainplates are tied to a composite grid and grounded to the keel. The NACA section fin keel is cast in lead and hardened with antimony before being through-bolted to a reinforced keel sump bed with stainless steel bolts. Careful inspection of the 362 reveals a boat that has been well-engineered and painstakingly assembled. On deck The 362 cockpit is nearly 7 feet long and quite comfortable. Still, the shape limits well size making it safe and seaworthy in a blow. The Edson pedestal and 40-inch Destroyer wheel are perched well aft, with a contoured helm seat offering good visibility. The cockpit seats are scooped out allowing you to make your way around the wheel. I like the fact that you can support yourself with your legs on either tack, even when heeled, and that there is a bridgedeck to keep green water out of the cabin. The standard Lewmar 48 self-tailing primaries are easily reached from the helm. There are small lockers astern and a larger locker to port complete with a most useful light. Sail controls are led aft to the end of the trunkhouse where there are stoppers and a pair of Lewmar 30 CSTs. The 362 has wide side decks and the molded nonskid pattern offers good footing. Double lifelines are well-supported although they could be a bit taller. Full-length handrails are perched on the house, and there are inboard and

6 outboard genoa tracks. The mainsheet traveler is pushed forward of the companionway to free up space in

cockpit. The Hall aluminum spar has double swept-back spreaders, is treated with an Awlgrip finish and has an air draft of 53 feet, 2 inches. Deck hardware is first-rate, from the cast alloy stemhead fitting to the beefy chocks and cleats astern. Down below The interior arrangement uses the available space flawlessly, and the cherry finish and excellent joinerwork is of typical Sabre quality. The forward stateroom is especially large for a 36-foot boat of moderate proportions. The double berth is 6 feet, 6 inches long and actually sleeps two in comfort. A convenient vanity sink and dressing seat arrangement makes much more sense than squeezing in another head in a boat of this size, and it lends a spacious feeling to the cabin. The saloon is also open thanks to a fold-up bulkhead- mounted table, which is a terrific idea in any boat less than 40 feet. Louvered lockers and berth backs provide abundant storage. Sabre pays attention to details: For example, the chainplate tie rods are nicely finished with wooden sleeves, and the chart table to port faces aft and has plenty of room to mount nav instruments and repeaters. The L-shaped galley is to starboard, with double stainless sinks facing forward and a two-burner gas stove and oven outboard. The good-size icebox is available with an optional front-loading door. Sabre also offers a range of Sea Frost refrigeration units and Corian counter tops as options. Taylor and the Sabre design team have logically opted for a single head with a separate stall shower located opposite the galley. A separate shower might be the single feature that moves a boat beyond the "camping" stage, and it also makes for a perfect wet locker, especially in the 362 because it's only a step away from the companionway. The aft stateroom, or aft quarter cabin, offers a double berth, decent storage above and below, and a hanging locker. It's ideal for occasional, short-term guests. Ventilation is excellent throughout with four Lewmar Ocean series deck hatches, custom stainless opening portlights and two chrome dorades. The standard diesel is a three-cylinder 35-horsepower Westerbeke with a fixed two-blade prop. A Yanmar 3JH2E is optional as is a feathering Max Prop. The 34-gallon fuel tank is aluminum and provides a realistic range of 250 to 300 miles under power. Robust bronze seacocks, hot and cold pressure water, and an activated carbon water filter are part of the standard plumbing package. The two 110-amp batteries and a 50-amp standard alternator should be upgraded if serious long-range cruising is in your plans.

Disclaimer

The company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change or withdrawal without notice.

ENGINES

Engine 1
  • Engine Make: Westerbeke
  • Engine Model: 35B
  • Engine Year: 1998
  • Engine Type: Inboard
  • Drive Type:
  • Power HP: 32.00
  • Fuel Type: Diesel
  • Hours: 120.00

Photos

Click any image to view enlarged version. Swipe enlarged image to see additional enlarged images.

Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of
Picture of

Multimedia

Contact Broker

For more information about this yacht please contact Curtis Stokes and Associates, Inc.
We look forward to working with you!

Want more information about this yacht?

Curtis Stokes & Associates

Curtis Stokes & Associates

Fort Lauderdale, FL
Phone: 1-954-684-0218
Toll Free: 1-855-266-5676
Fax: 1-954-807-1445
Email: info@curtisstokes.net
Website: https://www.curtisstokes.net

Curtis Stokes and Associates, Inc. is a yacht brokerage firm consisting of nine offices and fifty brokers throughout the United States offering worldwide marketing, buyer brokerage services and yacht charters. We also specialize in marketing and selling Great Loop capable yachts and boats.



Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of
Picure of